The MeterSync Blue is used with most meters to sync data to Cornerstones4Care® powered by Glooko app. There are three configurations for using the MeterSync Blue:
Click here to determine the correct syncing device for your diabetes device. |
![]() |
What you will need:
- The Cornerstones4Care® powered by Glooko app on your iOS or Android Device
- The Glooko MeterSync Blue
- Your Diabetes Device
Let’s Sync!
- Navigate to the Sync Menu by tapping Sync in the top-right corner on the home screen.
- If your blood glucose meter is listed, tap on the Meter Name. If it is not listed, tap New Device. On the next screen, tap Blood Glucose Meter, select your device from the list, then tap Add. Your device will now be listed on the Sync Menu. Tap on the Meter Name.
- If you have not yet paired your MeterSync Blue, you will be required to do so at this time. Follow the on-screen instructions to pair your MeterSync Blue.
- You now have the option to view a tutorial for the selected meter. This will demonstrate how to put the meter in data transfer mode.
- Tap Next to proceed through each screen of the tutorial.
- You can disable the tutorial for the future by toggling Don’t show this tutorial again button ON.
- Once you have placed your meter in data transfer mode, tap Sync.
NOTE: Some meters require to be turned on in order to Sync. Please refer below to see if your meter requires any special instructions.
ACCU-CHEK Infrared |
For ACCU-CHEK Infrared meters, press and hold the left and right buttons at exactly the same time until you see L-Shaped symbols on the display. |
Bayer Blood Glucose Meters |
Turn the BG meter ON – three dashes will appear on the BG meter’s display |
CS 0123
Comments
Article is closed for comments.